Throttle Body Assembly S11-1107011EA for Chinese Brand Vehicles

The throttle body assembly S11-1107011EA from Taizhou HongBen Auto Parts Co., Ltd. is a throttle body for Chinese-brand vehicles. The product page lists the factory number 6360100, the OE number S11-1107011EA and the auto brand as Chinese-brand vehicles. HongBen also supplies drive shafts, front axle shafts and other automotive parts.

What the Throttle Body Does

The throttle is a controllable valve that controls the air entering the engine. It is connected to the air filter at the top and to the engine block at the bottom. After the air enters the intake pipe, it mixes with fuel to form a combustible mixture, which burns to produce power. The throttle body therefore has a direct effect on engine response, idle quality and fuel consumption.

A throttle body assembly includes the housing, the throttle plate, the shaft and, on an electronic unit, the motor and the position sensor. The buyer should confirm whether the part is a complete assembly or a housing only, and whether the sensor and the motor are included. A part that looks similar but lacks the correct sensor may not work on the vehicle.

The product page gives the OE number and the factory number, which are the practical way to match the part to the vehicle. The buyer should check the OE number against the vehicle or the old part, and should not rely only on the engine size or the model name.

Throttle Types

The product page describes four types of electronic throttle: electro-hydraulic, linear electromagnet, stepping motor and DC servo motor. It states that the DC servo motor type is widely used in automobiles, while the electro-hydraulic and stepping motor types have lower control accuracy and the linear electromagnetic type has higher power consumption.

The type matters for the replacement. A vehicle that uses a DC servo throttle needs a compatible motor and sensor, and the ECU may need a calibration or a relearn procedure after installation. The buyer should confirm the installation procedure and whether a diagnostic tool is required.

The page also explains that throttle fouling comes from oil vapor, particles and moisture in the air. The air filter quality, the oil brand, the driving conditions, the air temperature and the engine temperature all affect how quickly the throttle gets dirty. A dirty throttle can cause a rough idle, a hesitation or a stored fault code.

Quality and Fit

The product page states that the assembly controls airflow for precise combustion and improves engine efficiency and vehicle performance. It also states that the high-precision design reduces lag, vibration and wear, and restores smooth throttle response after replacement. The buyer should verify those points on a sample and on a vehicle.

The buyer should check the bore size, the bolt pattern, the connector, the sensor type and the calibration. A throttle body that fits the intake but has the wrong connector or sensor will not work. The part should also be checked for the throttle plate clearance and for smooth movement through the full range.

For an aftermarket supplier, the packing and the documentation matter. The buyer should ask for the OE number on the label, the installation sheet and the warranty. A part that is sold without the correct identification can cause a return or a fitment complaint.

Applications and Ordering

The part is used on Chinese-brand vehicles and in the automotive aftermarket. The buyer should confirm the vehicle model, the year, the engine and the OE number before the order. A photo of the old part and the connector is a practical way to avoid a mismatch.

The order should state the OE number, the factory number, the quantity, the packing and the documents required. The buyer should also ask for the lead time, the warranty and the sample policy.

HongBen can be contacted through the email shown on the product page. The buyer should send the vehicle information and the old part photo so that the supplier can confirm the fitment.

The throttle body assembly is a small part in the engine air system, but the fit and the sensor compatibility decide whether the vehicle runs correctly. A correct OE match and a sample check reduce the risk of a return.